part from Redpower Logic

Screwdriver


The screwdriver is the tool in RedPower used to reorient an already placed logic gate or to modify the properties of certain blocks.

Right-clicking a machine block or logic gate with the screwdriver will rotate the block without the need to replace it. The block cycles through all 6 possible orientations, beginning at the start on further clicks. This will work on RedPower 2 logic gates and machines as well as vanilla pistons, repeaters and dispensers.

Shift-right-clicking on many RedPower 2 logic gates will change some property associated with the gate; for example, on an RS latch, the gate can be mirrored (exchanging output sides without exchanging input sides) and the reflection of an output signal through the corresponding input (in addition to the regular output) can be enabled or disabled. RedPower Control monitors, disk drives, and I/O expanders can also be shift-right-clicked with a screwdriver; doing so opens up the control panel where the DIP switches setting the device's Redbus address can be changed.

Crafting


The Screwdriver is crafted using an iron ingot and a stick:

top_7.png top_32.png top_32.png top_32.png top_40.png top_60.png top_7_topright.png
left_1.png
Grid layout None (small).png
Grid layout None (small).png
Grid layout None (small).png
Grid layout Arrow (small).png
Grid layout None (large).png
Screwdriver
right_1.png
Grid layout None (small).png
Grid layout None (small).pngIron Ingot
Grid layout None (small).png
Grid layout None (small).png
Grid layout None (small).png
Grid layout None (small).pngStick
bottom_7_left.png bottom_32.png bottom_32.png bottom_32.png bottom_40.png bottom_60.png bottom_7_right.png




See also

Sonic Screwdriver (Page coming soon)